Atacama Pathfinder EXperiment APEX
OLD pages, check new site
LABOCA Calibration
MPIfR Bonn   ESO   Onsala Space Observatory
  APEX TWIKI CONTACT SEARCH HELP NEWS DISCLAIMER

Home > Instrumentation > LABOCA > LABOCA Calibration > Array parameters

Array parameters April 2018
(April 03 - April 19)

Main parameter file: laboca-2018-04.rcp

A new RCP file laboca-2018-04-rcp has been created for the first cool down period of LABOCA 2018, this is the result of the combination of two beam Maps on Mars (scans 11062 and 11445), both observed in good weather.

The total number of working backends is 198.

Individual scans

Scan #Date Parameter fileArray plotIndividual channel maps
11062 2018-04-18 07:07:50 Mars_11062_Laboca.rcp array_11062.pdf beams_11062.pdf
11445 2018-04-19 06:59:48 Mars_11445_Laboca.rcp array_11445.pdf beams_11445.pdf

Notes on individual channels

Note: Channels which are terminated with a resistor are not listed in the following table.

Channel #Description
101, 103, 106, 110 Strong cross-talk: 101↔106 and 103↔110. 101 and 103 may be usable for point sources only.
81, 82, 83, 84, 85, 86, 89, 90, 91, 92, 93, 94, 96, 136, 159, 160 Channels located in group 4 / cable M. These channels usually don't show any astronomical signal and are considered bad.
114, 116, 117, 118, 119, 120, 126, 128, 129, 130, 131, 132, 133, 134, 141, 147, 148, 152, 153, 154, 155, 156 Channels located in group 5 / cable L. These channels don't show astronomical signal (factor 20 below normal) and are considered bad.
177, 179, 180, 182, 183, 184, 185, 191, 192, 201, 202, 203, 205, 207, 217, 218, 220 Channels located in group 7 / cable A. These channels don't show astronomical signal and/or cross-talk and are considered bad.
6, 45, 170, 199, 204, 206, 208, 211, 213, 219, 222, 228, 241, 257, 309 Bad channels, not showing any astronomical signal or very low signal levels, unconnected to groups 4, 5, or 7 above.

Channels flag file

Channels list updated 2018-Jun-20.

Current file name: channel_flags-2018-04.boa,
# 25 channels not connected to any bolometer
not_connected = [ 29,  33,  35,  40,  64,  66, 124, 135, 142, 144, 146, 151,
                 158, 189, 193, 195, 200, 224, 226, 284, 295, 302, 304, 306,
                 311 ]
# 20 channels with 1MOhm resistor
resistor = [  15,  16,  87,  88,  95, 139, 143, 145, 149, 150, 157, 178,
             181, 186, 187, 188, 190, 255, 310, 317 ]
# 2 channels sealed with an absorber
blind = [ 4, 163 ]
sealed = blind
# channels showing strong cross-talk
cross = [ 101, 103, 106, 110 ]
# Bad channels (no/low signal or very high noise)
bad = [ 6,  45,  81,  82,  83,  84,  85,  86,  89,  90,  91,  92,  93,  94,
       96, 114, 116, 117, 118, 119, 120, 126, 128, 129, 130, 131, 132, 133,
      134, 136, 141, 147, 148, 152, 153, 154, 155, 156, 159, 160, 170, 177,
      179, 180, 182, 183, 184, 185, 191, 192, 199, 201, 202, 203, 204, 205,
      206, 207, 208, 211, 213, 217, 218, 219, 220, 222, 228, 241, 257, 309]